SDCH-L - Hose filter unit

Dust collector SDCH-L is a compressed air cleaned hose filter for continuous filtration of fine dust. The collector is supposed to be used for under pressure, i.e. the fan is installed after the collector. The circular gas inlet and outlet, can be swiveled to an optional position as the filter consists of several reciprocally adjustable parts.

Compressed air requirement: max 2 l/s...

Dust collector SDCH-L is a compressed air cleaned hose filter for continuous filtration of fine dust. The collector is supposed to be used for under pressure, i.e. the fan is installed after the collector. The circular gas inlet and outlet, can be swiveled to an optional position as the filter consists of several reciprocally adjustable parts.

Compressed air requirement: max 2 l/s, 4,5 bar, free of oil and water. Maximum gas temperature: +60° C.

 

 

The following service spaces need to be considered: minimum 800 mm in front of the filter and 500 mm above the filter.

 

Installation and maintenance
NB Service switches for fans must be turned off during maintenance. Use protective gloves, safety goggles and face mask.

Setting up
The separator must be installed on a flat and sturdy foundation, indoors or outdoors if protected from the weather. It consists of several reciprocally adjustable parts, as follows:
• Container for emptying with a dust liner
• Swivelling inlet section
• Filter section
• Swivelling outlet section/clean gas section with cleaning valves.

Loosen the flanges and position each section so that the service hatch and connection sleeves are aligned in a suitable way. Then tighten the flange. Connect the channel for dust-laden air to the sleeve on the inlet section and the channel for clean air to the sleeve on the outlet section/clean gas section. Fit the supplied pressure equalization hose between the sleeve on the outlet and the sleeve on the dust container. The hose gives rise to an under pressure in the container to keep the plastic bag in place. The hose is to be fitted with slack so that the dust container can be removed when changing the plastic bag. Connect clean compressed air that is free of oil and water to the connection on the separator’s upper section. Maximum air pressure 5-7 bar. All electric installing should be done by a professional electrician.

Before putting into service, make sure that
• The compressed air has the right pressure.
• All connections are airtight and secure.
• The filter hoses are correctly located.
• The inspection hatch is closed properly
• There is a plastic liner in the container.

Read More »
Art Nr Description Filter area m² Stock* Price** Total
SDCH-3-L Air compressed cleaned hose filter 3 Quote on request
SDCH-5-L Air compressed cleaned hose filter 5 Quote on request
SDCH-7-L Air compressed cleaned hose filter 7 Quote on request
SDCH-9-L Air compressed cleaned hose filter 9 Quote on request
SDCH-12-L Air compressed cleaned hose filter 12 Quote on request

* Stock standard

** Prices exclude VAT