Centrifugal medium and high pressure fan. Impeller with open blades. Directly connected motor.
AIR FLOW - V = 1,080 ÷ 15,000 m³/h
PRESSURE - PT = 3000-14000 Pa
MAX AIR TEMPERATURE - 80°C
Use: for aspiration of very dusty air containing different types of materials. The level of use of this series of fans is extremely high in the follow...
Centrifugal medium and high pressure fan. Impeller with open blades. Directly connected motor.
AIR FLOW - V = 1,080 ÷ 15,000 m³/h
PRESSURE - PT = 3000-14000 Pa
MAX AIR TEMPERATURE - 80°C
Use: for aspiration of very dusty air containing different types of materials. The level of use of this series of fans is extremely high in the following industries:
Sawmills / carpentry: for transporting sawdust and wood chips;
Tanneries: for transporting leather clips and shavings;
Bookbinding: for transporting paper tracks;
Textile industry: for the transport of yarn waste and long fibers;
Plastics processing industries: for the transport of granules and nylon inserts; for charging solid combustibles in boilers etc.
ErP: these fans are covered by Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation with high temperatures (fans designed with cooling fan)
- Operation with temperatures below -40 ° C
- Work in toxic, corrosive or abrasive environments (use of materials such as AISI 304, AISI 316, manganese steel).
These series are centrifugal forward-curved fans and are therefore expected to Ntarget = 42 (Reg. UE N.327/2011). ErP calculations take into account the efficiency of IE2 motors that comply with IEC 60034-30. Note that these fans are designed to transport materials. For this reason, Directive 2009/125/EC is applied, but they are not subject to the energy efficiency restrictions it imposes and therefore not to the verification of these parameters. NOTE: These fans can also be used as paper shredders with high reliability, by applying a special adapter to the fan wheel without affecting the air properties. Our technical department is always at your disposal for questions.
General remarks: The fan is rotatable. When using a drive, pay attention to possible overheating of the motor due to lower speed/Hz than what the motor supplier recommends.
Yellow area notes: WARNING: possible overload of the motor and/or any mechanical limit of the impeller, contact the technical department if necessary.
Sound level: Sound pressure in free field 1 m from the fan.
