Centrifugal medium and high pressure fan. Impeller with open blades. T wheel. Directly connected motor.
AIR FLOW - V = 1,080 ÷ 15,000 m³/h
PRESSURE - PT = 200-6500 Pa
MAX AIR TEMPERATURE - 80°C
Use: for aspiration of very dusty air containing different types of materials.
Sawmills/carpentry: for transporting sawdust and wood chips;...
Centrifugal medium and high pressure fan. Impeller with open blades. T wheel. Directly connected motor.
AIR FLOW - V = 1,080 ÷ 15,000 m³/h
PRESSURE - PT = 200-6500 Pa
MAX AIR TEMPERATURE - 80°C
Use: for aspiration of very dusty air containing different types of materials.
Sawmills/carpentry: for transporting sawdust and wood chips;
Tanneries: for transporting leather clips and shavings;
Bookbinding: for transporting paper tracks;
Textile industry: for the transport of yarn waste and long fibers;
Plastics processing industries: for the transport of granules and nylon inserts; for charging solid combustibles in boilers etc.
ErP: these fans are covered by Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation with high temperatures (fans designed with cooling fan)
- Operation with temperatures below -40 ° C
- Work in toxic, corrosive or abrasive environments (use of materials such as AISI 304, AISI 316, manganese steel).
These series are centrifugal forward-curved fans and are therefore expected to Ntarget = 42 (Reg. UE N.327/2011). ErP calculations take into account the efficiency of IE2 motors that comply with IEC 60034-30. Note that these fans are designed to transport materials. For this reason, Directive 2009/125/EC is applied, but they are not subject to the energy efficiency restrictions it imposes and therefore not to the verification of these parameters. NOTE: These fans can also be used as paper shredders with high reliability, by applying a special adapter to the fan wheel without affecting the air properties. Our technical department is always at your disposal for questions.
General remarks: The fan is rotatable. When using a drive, pay attention to possible overheating of the motor due to lower speed/Hz than what the motor supplier recommends.
Yellow area notes: WARNING: possible overload of the motor and/or any mechanical limit of the impeller, contact the technical department if necessary.
Sound level: Sound pressure in free field 1 m from the fan.
